Dipping powder manicures are trending today like never before. The younger generation likes manicures that simultaneously last long and look graceful. So, the proper solution is to go for LDS dip nails. Therefore, the dipping powder procedure has become the favorite of many women worldwide.
Though dipping powder manicures are durable, something can always go wrong if you do not follow the proper procedure. Under such circumstances, you should know how to handle the situation without panicking. The most common dipping powder issues are lifting, cracking, and expanding. Besides, you can encounter problems when removing dipping powder. This blog discusses these issues and recommends ways to troubleshoot them.
Lifting of the nail
Generally, dipping powder sticks to the base coat, which in turn sticks to the nail surface. Therefore, lifting can occur if the dipping powder color does not adhere properly to the nail. One can trace the problem to the prepping stage. One should ensure that the nail surface is clean of all debris, oil, and water before applying the basecoat. That is why experts harp a lot on the preparation process.
Solution – One should be thorough when prepping the nails for the dip powder manicure. You can use a cuticle remover to remove dead skin from the nail surface. Using a grit file can help rough up the nail surface slightly to allow the basecoat to stick to the surface properly. It is better to use a primer before applying the basecoat as it helps to dehydrate the nail.
Cracking of the nail
Uneven application of the product between layers and coats can result in the vertical cracking of the nail. The angle you hold the brush assumes great significance. Suppose you tilt the brush upright and hold it perpendicular to the nail. In that case, there can be an uneven buildup of products resulting in ridges and hills on your nail surface. Similarly, incorrect dipping of your nails into the LDS dipping powder color can also cause uneven distribution leading to the cracking of the nail.
Solution – Professionals advise holding the brush at an appropriate angle. One should hold the brush parallel to the nail and move it from the cuticle towards the free edge in single long strokes. Braking in between the application can cause lump formations. The proper dipping procedure is to dip the nails into the bottle at a 45-degree angle. It allows the powder to pile up on the nail surface evenly. Before applying the topcoat, you should dust the excess powder and ensure uniform application.
Expanding of the nail
Your nail surface is a small area. Hence, it can be challenging to maintain the LDS powder color within its boundaries. In addition, despite using thin coats and polish layers, dipping powder can tend to spill over the cuticles and sidewalls if you do not apply the product correctly.
Solution – When you apply the basecoat initially, you should leave out a clear margin of a millimeter or so below the cuticle area. You should ensure that the basecoat does not spill over to the sides or on the cuticles at this instant. It is because the dipping powder sticks to the basecoat and not to the nail surface. You can quickly dust off the powder from the surface not exposed to the basecoat.
Hence, it is better to maintain a 45-degree angle when dipping your nails into the powder bottle. It ensures that the powder application remains even. You can apply a second layer of basecoat over the dipping powder by taking it as close to the cuticle as possible. Repeating the dipping process allows the powder to stick to the second layer. Thus, you can work in small increments to ensure that the dipping powder does not spill over to the cuticle areas or the sides and damage your LDS dip nails.
Issues with dipping powder removal
The thicker the dipping powder layer, the more soaking is required. Hence, you should ensure to file the nail surface to get rid of the excess dipping powder. The problem is that you could end up filing more than required and cause nail damage.
Solution – Learn how to remove dipping powder from the nails.
The idea is to file away the dipping powder residue to as thin as possible. Thus, it becomes convenient to remove the polish layer.
You can soak cotton balls in a nail polish removing solution containing acetone. Place these balls on top of the nails and cover them completely. You can use aluminum wraps to hold the cotton balls in their place.
Wait for about 25/30 minutes before removing the wrap and cotton balls. The polish layer should come off quickly on its own. Finally, you should wash your nails with soap and water.
It is essential to know how to troubleshoot problems with your LDS nails. In addition, it helps to maintain your manicure better so that it lasts longer.